Keeps all the grime, dirt, water, and other debris away from the wheel bearingsMade with strong steel and zinc plated for durabilityMatches OE specifications for correct fitment…
A kit for pitted or worn hubs. Includes 1 race (sleeve) , 1 bearing, instructions & Loctite adhesive.
New bearing has same ID, but smaller OD to fit within new sleeve.
…
For use with original or reproduction 1940-48 style "slip -over" drums. Includes both bearing races and a dust cap. USA made. Drum mounts to front side of hub, used with our 21A- series brake drums.
…
This is the seal that is placed against the rear hub prior to installing the washer and nut to the rear axle. This is for a bevel gear drive type rear axle.
…
Hubs have studs pressed into them. They have a 5" x 5 1/2" bolt pattern. They are for use with original or reproduction 1940-48 style "slip-over" drums (21A-1125 or 21A-1125-F). The rear hub is keyed for use with a stock axle &…
Also for 1932-1948 Passenger
This requires machining for installation. Always double check inner dimensions before machining the housings. Instructions are included. USA MADE.
…
Best Quality Replacement Front 4WD Hub 100% OE Certified Exact Fit & Function For Four Wheel Drive Applications Two Required Per Truck For 1977: This Hub Fits The Dana 44-8F Or GM Axle Our 4X4 Hubs are direct replacement hubs that…
The front & back stud are now interchangeable, as per the manufacturer. If original stock steel wheels are being used, you may need to use A1012WS on the rear drums, as the length of the shoulder of the stud may bottom out before it…