The Ridetech C10 StrongArm system replaces OEM leafsprings entirely. We have designed several specific systems for late model full-size and mini trucks. The rear C10 StrongArm system will lower your truck as much as 10” while improving handling and load capacity. Installation is completely bolt-on affair with no welding or fabrication necessary. For the customer that wants a bolt-on system with no fabrication or welding, Ridetech has the answer!
- Bolt-on installation. No welding required!
- Designed for use with Shockwaves or CoilOvers.
- Lowers vehicle up to 10”
- Pre-engineered mounting hardware to maintain ground clearance, driveline angles, tire clearance and load capacities
- Improves ride quality
- Better handling
Features of the C10 Rear StrongArm System
- The front trailing arm crossmember is designed to allow the exhaust to be run through it rather than under it providing additional ground clearance.
- The panhard bar mount has been relocated to optimize the bar length and angle for the lowered height. This helps keep the rearend centered in the truck and lowers the roll center to mimize body roll. We use R-Joints on both ends of the bar.
- The C-notches are included with the kit and FIT the frame rail.
- With the Ridetech StrongArm system, the driveline angles have been optimized for the lowered height.
- The StrongArm system includes new trailing arms for the guys with trailing arms that have rusted out. They include R-Joints at the front attachment.
- The panhard is adjustable so you can optimize your tire clearance at the new lowered height.
- Designed for use with Shockwaves or CoilOvers.
WARNING: Cancer and Reproductive Harm
About Ridetech
Ridetech manufactures exciting suspension systems that improve the handling and ride quality of your muscle car, truck, Corvette or hot rod. From restorations and show cars, to high-speed autocross and track day cars, Ridetech offers a wide range of premium products including air suspension systems (air ride), coil-overs, shock absorbers, coil and leaf springs, tubular control arms, roll bars, sway bars and much more.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Chevrolet |
C10 Pickup |
1963 - 1972 |
| GMC |
1000 Series |
1963 - 1965 |
| GMC |
1500 Series |
1963 - 1965 |
| GMC |
C15/C1500 Pickup |
1967 - 1972 |
