Looking to convert your classic Chevrolet to disc brakes? This conversion set is the answer. Requires minimum of 15" disc brake compatible wheel.
Set includes:
11" GM Rotors Multi Pattern
Fits 5 x 4.75" with 7/16 Studs or 5 x 4.5" with 1/2 Studs
Large GM Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado style)
D54 Pads Included
Caliper Brackets & Spacers
Bracket Hardware
Flex Hoses & Clips
Emergency Brake Cables
Tech Notes:
Maximum diameter of 6.11" to fit rotor hat.
Rotor Center = 2-3/4".
Rotor Hat Section Inside Diameter = 6-1/8".
You will need to modify your axles if they will not fit inside the rotor hat.
You will need to modify the rotor if the center hole is too small for your axles.
.050x45 Degree Chamfer.
2.786" max register axle.
Must use 15" or larger disc brake compatible wheels.
When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder will be needed.
This kit will push your wheels out an additional.125? per side, longer wheel studs may be required after installation of this kit
The emergency brake cables provided in the kit will fit 1955-64 Full Size Chevrolet. The intermediate cable, center pull and cable couplers may not be necessary on 1958?64 cars.
Chevrolet Applications
1955 - 1964 Chevrolet Bel Air
1958 - 1964 Chevrolet Biscayne
1958 - 1961 Chevrolet Brookwood
1957 - 1958 Chevrolet Del Ray
1958 - 1964 Chevrolet Impala
1959 - 1961 Chevrolet Kingswood
1955 - 1961 Chevrolet Nomad
1955 - 1957 Chevrolet One-Fifty Series
1959 - 1961 Chevrolet Parkwood
1955 - 1957 Chevrolet Two-Ten Series
1958 - 1958 Chevrolet Yeoman
Chevrolet Truck Applications
1959 - 1960 Chevrolet El Camino
1955 - 1960 Chevrolet Sedan Delivery
About OER
OER® was established in the early 1980's to manufacture original equipment reproductions where every part is meticulously reproduced to exact factory specifications. All OER® parts are reverse engineered or manufactured using original blueprints when available to ensure the closest possible reproduction available on the market. When available, original factory tooling is utilized to insure complete originality. Our mission is to supply the highest quality parts available for the enthusiast and serious restorer. Whether you're a serious restorer, or just someone who wants a replacement part for your classic vehicle, OER® is the source for the finest quality parts on the market. Today, OER® is the most recognized brand in automotive restoration parts. Choose OER® for all your restoration needs.
Many OER® products are officially licensed by General Motors and the Chrysler Group ensuring the quality and authenticity of these products. The GM Restoration Parts logo and the MOPAR Authentic Restoration Product logo are the true signs of quality. OER® is licensed by GM and the Chrysler Group as an official restoration parts manufacturer.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
