A quality reproduction rear control arm for 1967-72 Chevrolet/GMC truck models with rear coil springs. This control arm, also known as trailing arm, installs to the rear axle housing and the center cross frame to support the coil springs.
This part features a black electrophoretically deposited coating (EDP, or E-coat) for superior long-term corrosion protection.⁕
Installs on the Left Hand (Driver) Side.
Note: Shipped double oversize.
⁕ Many metal products are delivered with a black electrophoretically deposited coating (EDP, or E-coat) for superior long-term corrosion protection, while others use a similar lacquer-based coating designed to provide protection for storage and shipping. Before installation, Classic Industries® recommends applying lacquer thinner with a shop towel to determine the type of coating. If the coating is removed by lacquer thinner, then it should be completely stripped from the product before any primer or paint is applied. If the lacquer thinner does not remove the EDP coating, it can simply be prepped, primed and painted without stripping.
| Make | Model | Years |
| Chevrolet | Truck | 1960 |
| GMC | Truck | 1960 |
